Breaking News

Sign Up to Receive Product and Project Updates

Super Therm for Green Home Building and Sustainable Architecture
SUPERTHERM Durability in weathering
after 15 years

Hanbul Incinerator plant - filtration dust collector ( RUSTGRIP ® & LININGKOTE 6000 ®)

CONTAINER HOMES-VIDEO BY-BOB VILLA

VIDEO BY-BOB VILLA

" This is the Third time we have had the pleasure to test SUPERTHERM ® PRODUCTS, it is rare that a single product will show such Repeatable Results in three totally different environments, South Florida and Denver Colorado, and LaPort Texas, a true testimonial to your products ENERGY STAR rating."
CONTAINER REPORT HOUSTON

ENERGY CONSERVATION ASSISTANCE PROGRAMS Designation : Texas ECAP-CUL-1-03 Method for Comparing Utility Loads in Standard Constructed Buildings

SP INTERLOCK / INNER SEAL ® and NON SKID ® used on a Concrete Floor for long lasting protection.

A System of SUPERTHERM ® and ENAMOGRIP WB ® Performing well After Six Years.

Two Coats of NON SKID ® applied to Seal and Protect the Concrete Floor.

Concrete Building Primed with SUNSHIELD 2000 ® and Top coated with SUPERTHERM

Designed for Standard Steam Pipe, or Oven Wall Construction applications whose Temperature Exposures fall between 150-350°F.

Ship protected by a system consisting of: SUPERTHERM® , RUST GRIP ® , MOIST METAL GRIP ® and ENAMO GRIP ®

HOT PIPE COATING ® used to reduce operating temperatures of an exchanger end.

A Shipping Container converted into living quarters and coated with a system consisting of SUPERTHERM ® and ENAMO GRIP WATER BASED ®

Xenon Tanks Coated with SUPERTHERM ® to Prevent Condensation on Concrete Walls

SUPER THERM ® maintains the same insulation effect 10 years after being applied to Batten Seam Roofing in an Industrial application.

SUPER THERM ® applied to the interior of a streetcar during production.

RUST GRIP ® applied on a Tanker Ship to Prevent Corrosion and Deterioration.

Two Million sq.ft of Industrial Roof Coated with SUPERTHERM ®.

SUNSHIELD 2000 ® used as a Thermal Break Under In floor Radiant Heating.

HOT PIPE COATING ® used on Exhaust Stacks at Vancouver Shipyards.

" This is the second time we have had the pleasure to test your product, it is rare that a single product will show such Repeatable Results in two totally different environments, South Florida and Denver Colorado, a true testimonial to your products ENERGY STAR rating."
Alexander Othmer - Director
FEO Energy Conservation Assistance
USF Tampa, Florida

DENVER VIDEO

ECAP REPORT - in PDF Format

ENERGY CONSERVATION ASSISTANCE PROGRAMS Designation : ECAP-CUL-1-03 Method for Comparing Utility Loads in Standard Constructed Buildings and was for comparative purposes with a prior test conducted in South Florida :
FLORIDA ENERGY VIDEO

FLORIDA ENERGY ECAP REPORT
This was a cooperative effort between Superior Products Mountain States Inc., the United States Department Of Energy, the State of Florida Energy Office and the United States Environmental Protection Agency.

HOT PIPE COATING ® tested at Vancouver Shipyards.

SUPERBASE HS ®, Sunshield 2000 ® and ENAMOGRIP ® used to seal and protect the metal structure of a Winery.

HOT PIPE COATING ® applied to a Raw Food Waste Processor in California.

HOT PIPE COATING ® applied to a Wellhead, to insulate the hot pipe and reduce surface heat.

AQUA POX - Non Skid ® used in a sensitive environment, to protect concrete floor from flooding of hot or cold water.

RUST GRIP ® applied to shop floor to provide a slip resistant and easy to clean surface.

These valves at Chevron Oil had not been able to be insulated before with the traditional wrap and clad.

This new high / low temperature coating is right out of research and development and is designed to stop thermal transfer from straight backside conduction.

Rustgrip and SUPERTHERM ® used to insulate and prevent corrosion to metal pipes.

SUPERTHERM ® used on tugs to prevent condensation.

SUPERTHERM ® used to insulate Hockey Rinks.

SUPERTHERM ® used on Excellent Ice Arena Expansion in Surrey, BC.

SUPERTHERM ® ASTM C-236 Test

Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box testing for measuring R values.

COOL ROOF PROGRAM

California Building Energy Efficiency Standards adopted July 2003.

HOME
HOME