September 22-27, 2006
APPLICTION AREA: Inside of filtration collectors at Incinerator plant No. 1&2 – SUS304, SS400
PURPOSE : Prevent corrosion inside filtration collectors at incineration plants
METHOD: Power wash with water first and then grind Apply RUST GRIP ® twice (Ave. 200~250microns) Apply LINING – KOTE ® twice (Ave. 200~250microns)
Upper area of filtration facility
Lower area of filtration facility
Before – upper area
Before – upper area magnified
Before – lower area
Before – lower area magnified
Power wash
After power wash
After power wash – insides
After grinding – insides
After grinding – upper side magnified
After grinding – lower side magnified
1st RUST GRIP application
2nd RUST GRIP application
2nd RUST GRIP application
1st Lining Kote application
2nd Lining Kote application