RUSTGRIP ®

**TEST LISTINGS**

1. RUSTGRIP® PATENT
Official United States Patent for RUSTGRIP®

2. ASTM ( American Society for Testing and Materials )
ASTM B 117 450 Hour Salt Spray Exposure Passed
- Salt Spray Fog Testing
- RUST GRIP ® over Black Steel		  
C 411 96 Hour Hot Surface Performance Passed
  - Tested at 147 degrees C (293 F)
- No Ignition, Smoking, or Smoldering
- No Change in Colour		  
  D 522 - Flexibility Passed
  D 1308 - Distilled Water Resistance (Immersion 24 hours) Passed
  - .010" Tin plated Steel
- 1/4" Steel or Aluminum
- 24 Hour Chemical Resistance (12 Reagents) - Spot Test on Glass		  
  D 1475 - Volatile Organic Content Passed
  D 1653 - Water Vapor Transmission Passed
  D 2369 - Volatile Organic Content Passed
  D 2370 - Visco-Elastic Properties Passed
  D 2486 - Scrub Resistance Passed
  - Black Plastic - No Break thru after 12 cycles  
  D 2794 - Direct Impact Resistance Passed
  D 3273 / D 3274 - Mildew Resistance Passed
  D 3359 - Adhesion Passed
  - Distilled Water Resistance (24 Hour Immersion)- .010" Tin plated Steel
- Paint / Repair Ability		  
  D 3559 Adhesion and Penetration testing Passed
  - Penetration through 18 layers of Lead Base Paint
- Rated 5A = Excellent
- MICRO PHOTOGRAPH
 
  D 3960 / D 4017 - Volatile Organic Content Passed
  D 4060 Tabor Abrasion Resistance Passed
  - Dry Abrasion Resistance
- 1000 Cycles with a CS 17 Wheel, 1000 gram Load
- 18 milligram loss per 1000 Cycles, rated Excellent		  
  D 4541 Standard Method for Pull-Off Strength of Coatings using Portable Adhesion Testers Passed
  - Average Pull-Off Strength = 1,467 psi  
  D 6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied to Masonry Passed
  D 7088 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
 Passed
  E 108 Standard Test Method for Fire Tests of Roof Coverings Passed
  E 1795 BioHazard Encapsulation Certification Conforms to all requirements
 

- Direct Impact Resistance
- Adhesion
- Dry Abrasion Resistance
- Water Vapor Transmission
- Flexibility
- Water and Chemical Resistance
- Water Immersion
- Surface Burning Characteristics
- Volatile Organic Content
- Weathering (1000 hours)
- Aging (interior and exterior)
- Scrub Resistance
- Mildew Resistance
- Paint / Repair Ability
- Tensile Properties

 
  E 84 - Surface Burning Characteristics Passed
  G 85 Prohesion Passed
  - 1500 Hour Salt Fog
- Rated 9 (out of a possible 10 rating) 		 

3. WINDOW CYCLING Test
Opening/Closing of treated window to measure friction/wear Passed
- Completed 20,000 cycles of opening / closing the window. 54 years of protection  

4. DNVCertification
DNV - DNV Audit and DNV Compliant Passed
- ASTM B 117, D 163, D 522, D 3359, D 4060, & E 1795 Passed
- Official DNV Certification of RustGrip ® for Maritime usage.
 DNV Certified


5. State of Louisiana Department of Transportation

6. State of Oklahoma Department of Transportation

7. Cobb County, Georgia Department of Transportation

8. USDA (United States Department of Agriculture )
USDA - Letter of Authorization from USDA Product Safety Branch USDA Approved
- Letter of Written Certification as Accepted by USDA from Manufacturer Approved
  - Environmentally safe and safe for use around animals Passed

9. ABS Coast Guard Approval
USCOAST GUARD

10. CFIA Canadian Food Inspection Agency
Accepted construction material Passed

11. China Center for Technical Testing
National Measurement M0729  
GB/T 1771-91 - Resistance to Salt Fog (2000 hours) Passed
GB/T 1866-88 - Manual Aging (2000 hours) Passed
GB/T 10834-88 - Resistance to Salt Water (1000 hours) Passed
GB/T 5219-85 - Adhesion (pulling apart method) 4.07MPa
GB/T 1733-93 - Boiling Water Immersion
 8 Hours
12. LEED - Leadership in Energy & Environmental Design
 Approved product
LEED GOLD CERTIFICATION
May 1, 2007 (revised May 21, 2007) (Washington, DC) – The U.S. Green Building Council (USGBC) has announced that projects seeking certification under the LEED® Green Building Rating System™ can now earn an "Innovation in Design" point by using the Cradle to Cradle program for certified building products.		  

 

 

 

 

Print this page

HOME
HOME