HOME
APPLICATION METHODS:
TOTAL SEAL/HS can be applied to concrete or masonry
substrates. The coating can be applied by
spray, brush or roller. For specific instructions on
surface preparation, mixing and application, please
refer to the SPI's application instructions for TOTAL
SEAL/HS.
MINIMUM SPREAD RATES:
* Film Thickness: Concrete and Masonry (three
coats) 6 mils wet/3.6 mils dry per coat
NOTE: The first coat should be mixed 50%/50%
TOTAL SEAL/HS and MEK. The second and third
coat would be applied at full strength