SUPERBASE (High Solids) ®
LIQUID CAULKING \ WATERPROOFING MEMBRANE
PROJECT PICTURES CERTIFICATIONS APPLICATION
PRODUCT DESCRIPTION:
SUPERBASE (HS) ® is designed from
the best-known high performance elastomeric specially formulated acrylic in the
market, known for adhesion, ability to pond water, weatherability, UV resistance,
flexibility and toughness. SUPERBASE (HS) ®
was blended to work cohesively with our MULTI MESH MEMBRANE and SUPERTHERM
® \ SUNSHIELD
2000 ®, together or separately, to form
a complete seal on any roofing or wall structure. SUPERBASE
(HS) ® is also applied as a base coat over MASTIC SEALING TAPE on
joints, seams, around A\C units, vents or any areas where leaks would most likely
occur. Longevity of service was the concern and the determination for quality
was built into this base \ primer coating. It is a water based high-performance
acrylic that is easily applied without environmental concerns and compliments
the quality of the SUPERTHERM
® \ SUNSHIELD
2000 ® base \ top coat.
SUPERBASE (HS) ® was designed to be applied to roofing structures to seal cracks. Seal over tar with SUPERBASE (HS) ® before applying SUPERTHERM ®, apply SUPERBASE (HS) ® over asphalt shingles or concrete or wood to seal before applying SUPERTHERM ® \ SUNSHIELD 2000 ®. It gives the correct base \ primer coat to seal over dry substrates to be absorbed into the surface allowing SUPERTHERM ® \ SUNSHIELD 2000 ® to set up properly. This affords the full effect of its ceramic mixture.
SUPERBASE (HS) ® is designed to apply to all roofing whether flat or inclined, in new construction or to retrofit wood, concrete, tar, sheeting, polyfoam, or sheetrock. This gives outstanding adhesion, scaling protection, flexibility and acts as a base \ primer coat for encapsulating the surface prior to applying SUPERTHERM ® \ SUNSHIELD 2000 ®.
USES:
To cover over seams that are no more than 1/32" opened to seal from water penetration
and secure the seam. If seams are standing open more than 1/32", then using the
fabric membrane is recommended in combination with the SUPERBASE
(HS) ® to secure the seams.
PHYSICAL DATA:
*
Solids: By weight 60.24% / by volume 61.58%
* Dry Time: One hour to touch/Overcoat
window at four hours at 70F. degrees in full sun / Fully cures in ten days
*
Lead and chromate free
* Cures by evaporation (water-based)
* Weight: 11.77
lbs. per gallon
* Vehicle Type: Water-borne
* Shelf Life: up to 3 years
(unopened) under appropriate storage conditions (see MSDS)
* VOC Level: 75
grams/liter - .62 lbs./gallon
* Viscosity: 200 KU
* Elasticity: 150 to 200%
*
UV resistant
* Light tan in color to aid in application of topcoat and dry time
LIMITED
WARRANTY :
Unless Superior Products provides a written
warranty of fitness for a particular use, Superior Product's sole warranty is
that the product, as supplied, will meet the current sales specifications
and is specific only to return of product found to be defective upon opening
of container within one year. Customer's exclusive remedy and Superior's sole
liability for breach of warranty is limited to refund of the purchase price or
replacement of any product shown to be other than as warranted and Superior Products
expressly disclaims any liability for incidental or consequential damages.
If WATER is a problem on any structure or equipment . . .
WE OFFER AN. . .
