HOME
ENAMO GRIP WB ®
APPLICATION
METHOD:
Surfaces must be clean and dry before application. Any
surfaces with loose or flaking old paints or corrosion must be removed before
applying. High pressure water-blasting is as effective as light sand-blasting
in removing loose or flaking surfaces if you use 5000 psi. As a rule, "a
coating is only as good as the surface it covers." Grease, oil, waxy substance,
dirt, etc. must be first cleaned from surfaces. Old paints can remain if bonded
solidly to surfaces. ENAMOGRIP WB ®
can bond to metal, masonry, wood and other porous surfaces-substrates. ENAMOGRIP
WB ® can be applied best by brush, squeegee or foam applicator.
Airless sprayers can be used using a 24-thousandth tip for a smooth, even finish.
FEATURES:
Lead and chromate free - No toxins
Shelf life:
1 year+
Vehicle type: Aqueous polyurethane dispersion
Pigment type: Varies
with color
Solids by volume: 40.26
Solids by weight: 39.36
Weight
per gallon: 8.7
Thickness: ( wet mil gauge recommended )
@200sq.ft./gallon
wet: 8 dry: 3
@100sq.ft./gallon wet: 16 dry: 6
Impact Resistance: Front
160psi/Back:
Water-borne
Packaged unit: Shipped as a 5-gallon kit.
Clean up: Soap \ water wash. Rinse out.
Dry Time: 2 hours to touch \ 4 hours
to recoat \ 10 days to full cure
Cures by: Evaporation with good sunlight
for 3-4 hours;
COMES READY TO USE, DO NOT DILUTE OR THIN.
IMPORTANT:
If solution does come in contact with eyes, flush immediately with water and contact
a physician for medical attention. Avoid prolonged contact with skin or breathing
of spray mist. For quickest removal from skin, wash with water before drying.
KEEP OUT OF REACH OF CHILDREN. This is a water-based product; nonflammable \ non-toxic.
COVERAGE RECOMMENDATIONS:
METAL...................................................................200
sq.ft./gallon
WOOD, CONCRETE, POROUS SUBSTRATES .125 sq.ft./gallon
FOAM
\ SUPERTHERM ®
combination (finish coat).250 sq.ft./gallon