ENAMO GRIP WB ®
THIN FILM PROTECTIVE COATING FOR ALL EXTERIOR SUBSTRATES
PROJECT PICTURES CERTIFICATIONS APPLICATION
PRODUCT
DESCRIPTION:
ENAMO GRIP WB ® is
a tough, single-component anionic dispersion of an aliphatic polyester urethane
polymer in water. This unique formulation offers UV control and weatherability
far superior to standard acrylic or blends that show weakness to acid rain and
severe weather changes and climate conditions. The formulation has additional
UV blockers and anti- flash rust inhibitors that strengthen the ability of the
coating to face today's industrial pollutants and city smog, as well as the increased
UV radiation. This coating was designed to overcoat SUPERTHERM
® and flex with the insulation coating without hairline cracking,
resists UV rays for stability, resists ponding water and maintains its toughness,
resists light foot traffic without harm to the coating surface.
This coating can be used alone as a finish coating over facilities and equipment.
Designed with automotive grade pigments to insure longevity in weathering
and toughness. NOTE: Being water-borne, the surface film is not acceptable
for anti-grafitti protection and removal as is our solvent-based ENAMO
GRIP ®. Only the original ENAMO
GRIP ® is designed for anti-grafitti protection. The overall
toughness, durability and weather-resistance of ENAMO
GRIP WB ® polyurethane polymers make this a good choice for
demanding product applications for architectural / maintenance situations
that require the utmost in exterior / interior durability.
PHYSICAL DATA:
* Solids:
By weight 39.36% / by volume 40.26%
* Dry Time: Two hours to touch / Overcoat
window
is four hours or longer / Fully cures in 10 days
* Lead and chromate
free
* Cures by evaporation (water-based)
* Weight: 8.7 lbs. per gallon
*
Vehicle Type: Aqueous polyurethane dispersion
* Shelf Life: up to 3 years (unopened)
under
appropriate storage conditions (see MSDS)
* VOC Level: 120 grams/liter (1.0 lbs./gal.)
* Impact Resistance: 160 psi front and back
* Tinting:
Can be tinted any color with a minimum
order of 250 gallons (smaller quantities
may
be available with written approval of
senior management)
FEATURES:
Lead and chromate free - No toxins
Thickness:
@200sq.ft./gallon wet: 8
dry: 3
@100sq.ft./gallon wet: 16 dry: 6
Impact Resistance: Front 160psi/Back:
Water-borne
Packaged unit: Shipped as a 5-gallon kit.
Clean up: Soap/water
wash. Rinse out.
Dry Time: 2 hours to touch/4 hours to recoat/10 days
to full cure
Cures by: Evaporation with good sunlight for 3-4 hours;
COMES
READY TO USE, DO NOT DILUTE OR THIN.
LIMITED
WARRANTY:
Unless Superior Products provides a written warranty of fitness
for a particular use. Superior Product's sole warranty is that the product, as
supplied, will meet then current sales specifications and is specific only to
return of product found to be defective upon opening of container within one year.
Customer's exclusive remedy and Superior's sole liability for breach of warranty
is limited to refund of the purchase price or replacement of any product shown
to be other than as warranted and Superior Products expressly disclaims any liability
for incidental or consequential damages.
If WEATHER is a problem on any exterior substrate . . .
WE OFFER AN. . .
