APPLICATION INSTRUCTIONS:
Before starting, it
is important to test on a small surface. Apply with a brush or a roller on the
desired surface; the quantity of remover should normally be between equal or double
the thickness of the coating to be removed. Leave to work between 5 minutes and
12 hours depending on the thickness of the coating to be removed. Rinse with a
pressure washer (preferably with hot water) from top to bottom.
* Each litre covers approximately 10² meters or 100² feet.
RECOMMENDED TEMPERATURE:
The ambient room temperature and that of the surface must not be below 0°
Celsius.
| Appearance: | Cream |
| Odour: | Agreeable |
| Stability: | Stable |
| Boiling point: | 100° C |
| Freezing point: | 0° C |
| Volatility: | 120 G/L |
| pH: | 5.0, 7.0 |
